I need to put rear shocks on.
I need to put rear shocks on.
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
I need to get my new tires put on, replace a busted brake line, replace my shifter cable, and replace my inner axle seals.
"Political correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."
"It's not cheating if you pay for it"
I need to get in the car Saturday morning and show up before you ****ers wake up
Originally Posted by afroman006
Creighton, you have done stuff with that jeep that would make a goat go "holy ****!"
Considering going. If I do I will take the cj7 which still needs a bunch of work. The cj5 is in pieces and a long way from being done.
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
I need to do a disc brake conversion on the rear of my jeep or just fix the drums because they are leaking. Also, I need to replace all of the bushings inside my rod ends on the 3-link and make sure my heater is working haha.
I am thinking about stocking up on parts that may break on the trail so does anyone have any advise on what parts i should keep in the tool box in my jeep just in case?
-Andrew-
1999 Cherokee crawler (The OD)
2000 F250 7.3l (The tow rig)
2006 KTM 625 SMC (The supermoto)
2009 KTM 250 XC (The 2 smoker)
U-joints, t-case yoke, axle shafts, spare drive shafts, those are the common pieces that go pop. As for your brakes, I would probably just tear down your drums and replace the brake cylinder in there, odds are that is what is leaking and probably costs ~$20 at O'reilly's. Good afternoon project.
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
This. Cheap and easy
Did you have a spare tire? TSL, despite being "Gods Tire", like to rip open in Clayton.
You have that winch, but it will suck hanging off the back at Clayton. I would rework either the carrier or the stinger to make it work up front.
Lighting is also a good thing to have for night runs.
92 YJ
04 F-150 4x4
11 F-250 4x4
I do not have a spare right now actually I didnt even think about that. And ya i need to do something about that winch. I am also planning on running some rock lights. My brother is an electrical engineer and he said he could wire up whatever I want him to so im putting him on winch, light, and CB duty. I have spare u joints and drive shafts so I guess axle shafts are the next spare i need to get as well as a wheel and tire.
-Andrew-
1999 Cherokee crawler (The OD)
2000 F250 7.3l (The tow rig)
2006 KTM 625 SMC (The supermoto)
2009 KTM 250 XC (The 2 smoker)
some fluids and radiator repair stuff/ all around fixall like jb weld is a good idea
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
Oh man, look for your next post to be about an electrical fire....
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
Hahahah no he knows what he is doing. He has wired all kinds of stuff. From rewiring our entire boat to motorcycles to my old truck to lighting and sound equipment for Kyle Park. Dude knows what he is doing.
-Andrew-
1999 Cherokee crawler (The OD)
2000 F250 7.3l (The tow rig)
2006 KTM 625 SMC (The supermoto)
2009 KTM 250 XC (The 2 smoker)
Wiring up lights does not require an electrical engineer. It requires 5 min on google and an hour in the garage
92 YJ
04 F-150 4x4
11 F-250 4x4
Ya I know ha but I dont feel like doing it and he loves doing that crap.
-Andrew-
1999 Cherokee crawler (The OD)
2000 F250 7.3l (The tow rig)
2006 KTM 625 SMC (The supermoto)
2009 KTM 250 XC (The 2 smoker)
The wife and I are heading up Thursday night.
Last edited by Busa; 10-15-2015 at 10:04 PM.
Jb, i potentially have a trailer you could borrow. Spears has trailer too.
Seth Stewart '04
2000 Suburban DD
1995 F150 SAS - Needs more work to sell
1998 GMC pickup - sold
2003 Yukon XL - wrecked/motor donor
1975 Scout - TBD
1976 Scout - parts truck
1972 IH 1310 dually - TBD
196? Scout 800 - 302 roller
Posting Permissions
Reply With Quote