If you take the lift off, you have to change the thread title to "The Dook"
If you take the lift off, you have to change the thread title to "The Dook"
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
Just thought I'd post up a little inspiration for this build...
mmmm long wheel base bronco....
Born to Kill
Originally Posted by RCcola55
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
Are they 1050 or 1250? 1050's might work but 1250's will rub everywhere (fenders bumper radius arm etc).
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
I'm not a wannabe Baja racer like yourself but I would put 35-37s on it and cruise it around town topless. Enjoy it for awhile instead of tearing into it
92 YJ
04 F-150 4x4
11 F-250 4x4
I need to get it driving good first, I figure going back to stock would be easy, simple and be a better starting point. Also the tires rub like crazy as it is.
Born to Kill
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
Rub on the fenders? Or on the radius arms/frame.
92 YJ
04 F-150 4x4
11 F-250 4x4
Radius ARM, frame, front bumper
Born to Kill
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
can you not adjust the steering stops?
...
Too much work... Just leave it as is
Do you have any idea what you're talking about? That would take about 2 hours of work and 4 hours of drinking beer..
I could adjust the steering stops, or just not turn the wheel as much (which I prefer). There will be virtually no difference in rubbing between lift and stock
Born to Kill
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
You lost me. So lower so you don't have to buy tires?
92 YJ
04 F-150 4x4
11 F-250 4x4
Step 1.
Sell wheels and tires for $600 to that guy
Step 2.
Sell lift for $600
Step 3.
Send beams to get cut and turned with the money you made from selling the lift
Step 4.
buy 17" methods with the money from the rims
Step 5.
Deaver coils and bilstein 5100's
Step 6.
Put my 37" toyos on said 17" rims
Step 7.
Go forth and broody
You have people interested in both the lift and wheels right now. Sell them.
You have the tires already, so the only thing you'll have to buy is the springs and shocks.
Tommy I hope you didn't waste much time on that responce. Neither 1 or 2 have panned out and I do.t have money for 3, 4 and 5. I'm talking about going back to stock for now, while I have 33s, to work on getting a better ride. I plan on driving, not trailering to the trails.
Born to Kill
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
I got time to kill
Plus, it's spelled response
Posting Permissions
Reply With Quote