What it appears I have:
1991 bronco
FI 5.8
Zf-5 with be-1356 fixed yoke manual shift
New 6 inch rough country lift
New drive shafts
Lots of new ac parts
Pioneer cd
Cobra cb
Everything seems to work but a bit of "whomp" ill check it out tomorrow.
Goal is to make this a very street-able mild wheeler.
Born to Kill
Originally Posted by RCcola55
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
Oh and it has already passed the Baja track test with flying colors.
Born to Kill
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
The Dook
...
Fixed it for you.
Goal is sell it or part it out in 3 weeks!
He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!
cool rig, hope you follow through on this one!
Registration goes out this month...
Born to Kill
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
Shackle flip with add-a-leafs
16 inch wheels
Gas gauge doesn't work
Tailgate rust and on spot on drip rail.
Fresh oil
Brand new lift kit.
Steers just like everyother bronco (****ty)
Last edited by BroncoJo; 02-12-2012 at 12:08 PM.
Born to Kill
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
How much for the trans/tcase?
BDR
You should do steering like I was going to on my truck.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
Part of the eventual plan, along wit cut and turned beams and going to about 4 inches of lift.
Born to Kill
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
thought you learned your lesson on broncos already...
How does the frame look around the radius arms? Any cracks?
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
No cracks, the lift kit is virtually brand new.
I think I'm going to un-shackle flip this thing, use the leafs from my old bronco, with the goal of getting the rear down 1-2 inches (making it level).
Born to Kill
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
don't you think the lift will settle after some hours on it. why don't you wheel it and break them in....
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
With the rear leaf springs being 20 years old I don't think they will settle much.
Born to Kill
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
Posting Permissions
Reply With Quote
