Craptastic! Anyone have 39" of tie rod material?

[agjohn02]

I'll bet I'm using more expensive taps than you are

Just single tool the fawker with a boring bar.

yes, but the definition of expensive changes drastically when you are the one that pays for them. (i.e.- doug)

[Doug Krebs]

let me see, Ill give you the tube for $15 if you tap mine as well

Tie rod and draglink?

Originally I told people $10 per link I believe. So each side was $5... Aren't weld in bungs like $10 a piece? I think $5 a side with me doing the labor is pretty good.

[fbronco86]

I'll bet I'm using more you are

Just single tool the fawker with a boring bar.

Yeah just single point the threads in place. Some kinda machinist you are haha. Who trained you anyway

[robertf03]

whats wrong with doing it that way?

[Doug Krebs]

whats wrong with doing it that way?

Don't try to understand robert, just move on!

[AggieTJ2007]

Tie rod and draglink?

Originally I told people $10 per link I believe. So each side was $5... Aren't weld in bungs like $10 a piece? I think $5 a side with me doing the labor is pretty good.

yeah tie rod and drag link, it sounds like a good deal since the tube is worth about $30

[Reckless]

What kind of transport fees is creighton willing to pay for me?

[Doug Krebs]

yeah tie rod and drag link, it sounds like a good deal since the tube is worth about $30

15 is fine, i was just justifying my JEW expenses...

although, I hate pulling a crecsent wrench for an hour, but I do realize you had to go pick up the tube, etc...

[Doug Krebs]

What kind of transport fees is creighton willing to pay for me?

slap on the ass? Search for the chadnutz thread, I think something like .36 cents a mile. You'll be rich!

[jerryg79]

slap on the ass? Search for the chadnutz thread, I think something like .36 cents a mile. You'll be rich!

Dude diesel was like a buck fitty back then, it has to have gone up to around $.54/mile.

[AggieTJ2007]

What kind of transport fees is creighton willing to pay for me?

beer

[AggieTJ2007]

15 is fine, i was just justifying my JEW expenses...

although, I hate pulling a crecsent wrench for an hour, but I do realize you had to go pick up the tube, etc...

sounds good, you also don't have to get my tube done this weekend, ill grab it the next time I am down/around there or someone heads north

[agjohn02]

If you've got a manual lathe that starts at full speed tap under power. we do it all the time at work and it's never broken or dulled a tap. lowest speed and just bump it on and off, back it out when it spins in the chuck. Use a ton of tap magic or similar lube on the tap and run coolant on the outside of the material.

one of the few things ive never done on a lathe. looks easy enough. ill try it next time im in the machine shop.


http://www.pirate4x4.tv/lathelink.html

[robertf03]

wow, I'm no expert but that video makes me cringe

I think if I ever own a shop I'd fire someone on the spot for storing the chuck handle in the lathe, and lack of safety goggles is pretty sweet too.