marine versions i bet
Type: Posts; User: tigweld
marine versions i bet
is that 3d printed mockup brackets?
That smooth part is the middle of the stud. The other treaded portion is broke off
i would take off those shocks and test drive!!! I got those for my fabtech lifted truck, did not last long, way to harsh. I think carli or one of the other higher end dodge suspension companies was...
and a better turning radius, problem is they only come attached to the wrong motor.
u would need to use more than just the spings, the shocks would be the only thing u would not need. none of this will make a 3/4 ton truck ride good!!! i would think the negative arch parabolic...
i had to go back and read that amazon listing. Its for one spring!! I was thinkin man i got fawked. I got the whole kit for 680 bucks i think. is fabtech even around anymore. at one time...
their springs are worth it fabtech(deaver). it did ride better than any lifted truck ive road in but not as good as stock. they are rated for a heavy bumper so with out it I think mine was a lot...
my pops had those on his excursion. still a lift spring=ok ride, not quit stock though. what does your leveling kit consist of? front hangers?
I had a fabtech 6" on one of mine and when i got...
To set up gears without a pinion depth measuring tool(which most shops don't have) takes a ton of time to get right. U have to b prepared to tear everything down multiple times ,most shops will not...
pinion depth looks is a lil deep. as the gears and bearings break in that pattern will start to move even further to the outside of the ring. coast side is gonna make some noise from the looks of...
or u can cut a lil and fit 05 up lights for a lil more and get way better lighting
They can easily be swapped from truck to truck. Takes a extra deep 18mm to get off tho
Check the ipr first
its a parade float!!!! on widened ttb front ends its pretty common to sleeve the passenger side double jointed shaft and lengthen. im not saying it's the right thing to do but.... im sure budget...
it was on americarna, they made a full float(safety hubs to racers) 9" using some goofy old school snouts that were original to the racecar. either way I would bet ray everham(the guy leading the...
Some 95's can be included
3m Seam sealer
have u tested the glow plugs? we've ran both our 7.3 trucks with 2 dead injectors for a period of time and as long as the glow plugs would come on,(needed a new relay) they would start in even the...
and a tj frame is even wider than yalls, especially in the back. id say at least 2 inches wider per side. set it up with a neutral wheel and then u can adjust it easier with a different backspacing...
my advise. build everything a lil thinner than u think it needs to be, it adds up real fast if u want big toolboxes in front and behind the wheels. the one im building would be way to heavy to...
the strainer on the bottom of the pick up is broke just like tummy's, my pops truck was doing the same thing.
until just recently that part was not available seperately from the sending unit. it is now if the dealer tells u it isn't tell them to look harder. I had to find the part no. myself and give it to...
you dont need to open the bottle all the way! a 1/4 turn is all that is needed and much safer, economical should something happen to the line from regulator to machine. to adjust pressure the gas...
clean the bowl and lines out, the factory fuel filters suck. there are screens at each of the lines going in to the head