Originally Posted by stx4wheeler
see big nasty thread for clayton body damage possibilities,
as for the leaves in the rear take out whatever huge lift block that is back there im asuming, then take a set of rear leaf spring front hangers and use them as the rear leaf spring hanger to give about 4-5.5 inches of lift depending on where you weld or bolt the hangers to, and it will give good flex. The front i would prolly try and find some stock springs off of something that are the same width and length as your current front springs and run those, or fab a set of the chevy 52's that clarke and cook are using.
Narrow the front like i did to my truck, heck ill give you the narrowed hood off big nasty for it. It only took me like a weekend worths the work to do this minus cutting and rewelding the hood, and could be done faster if you dont really care about looks, i.e leave the front grille shell off. For the rear i would just take off the bed, also if you want my old half doors that are all beat up i will give you those as well. Hell if you wanna save the fender to which look to be in good shape for your bronco, then ill give you my cut fenders as well. So then you wont have to really worry about the body, and it will have already had two clayton trips on it. :flipoff2: