Kickass! Good times indeed!Quote:
Originally Posted by chevsu
Printable View
Kickass! Good times indeed!Quote:
Originally Posted by chevsu
fawk. Maybe I should try to rig up some kinda roof and hood before the trip. Has it ever actually snowed during a trip up there?Quote:
Originally Posted by chevsu
I Dont Know But You Can Definatly Count On It Raining Cats And Dogs For Sure...
doug it is jsut butt welded to the cylinder, he has a new style thatt threads in and also is welded on that i am gonna upgrade to after clayton.
Steve, when was the last time you were in clayton?Quote:
Originally Posted by StevenAg03
Dam that's some cheap ****. Can't even thread the end of a rod.Quote:
Originally Posted by stx4wheeler
You can weld the eye on. But 6011 is not what to use. Or maybe with as cheaply built as his cylinders are they have 1018 shafts or such and it'll work. At least use 7018. And protect the rod from weld spatter that will eat seals.
im not welding the rod(the part that moves in and out) kopecki, it is the stud on the back of the ram.
Oh. Well then weld.
Quote:
Originally Posted by Fredo
ummm...good question...i dont know, but the three or four times ive been there it has been nice outside..then all of a sudden it will start pouring and then nice again.
why do you ask?
I would bevel the end all of the way around to get deep penetration and then weld w/ a 7018 or higher
are you going to write a short story about it? turn caps lock offQuote:
Originally Posted by StevenAg03
lww K :flipoff2:
small tarp?Quote:
Originally Posted by CRaSHnBuRN
Quote:
Originally Posted by BMFScout
HUHHUH...i wuz thinkun of writin one...HUHHUH
i forget sometimes that my CAPSLOCK is on. all the work i do here requires caps lock...
I was actually thinking this may be the answer. I was gonna hit the board first, then head over to the harbor frieght site and see what they had that might work.Quote:
Originally Posted by BMFScout
Your hood line is pretty unobstructed except for the crossover for the shock towers, why not pick up some sheet steel or aluminum and make one. Just cut a slot for the crossover, weld some tabs for hood pins or Dzus on the cage, and voila! :DQuote:
Originally Posted by CRaSHnBuRN